Fiberglass sleeve
  • Air ProFiberglass sleeve
  • Air ProFiberglass sleeve
  • Air ProFiberglass sleeve
  • Air ProFiberglass sleeve
  • Air ProFiberglass sleeve
  • Air ProFiberglass sleeve

Fiberglass sleeve

The glass fiber tube is made of high-purity alkali-free glass fiber woven into a tube, and then the outer wall of the tube is coated with organic silica gel and then vulcanized. It is a very high temperature resistant sleeve, usually used for thermal protection of wires, cables and hoses. And it is flexible at low temperatures and easy to install. The high dielectric strength of this silicone woven glass fiber sleeve makes it ideal for power supplies, wiring harnesses, motor coils, heater leads and electrical components.

Send Inquiry

Product Description

Introduction to Silicone Fiberglass Sleeve:

The glass fiber tube is made of high-purity alkali-free glass fiber woven into a tube, and then the outer wall of the tube is coated with organic silica gel and then vulcanized. It is a very high temperature resistant sleeve, usually used for thermal protection of wires, cables and hoses. And it is flexible at low temperatures and easy to install. The high dielectric strength of this silicone woven glass fiber sleeve makes it ideal for power supplies, wiring harnesses, motor coils, heater leads and electrical components.

Fiberglass sleeve


Features:

Safety and environmental protection, protect the health of workers

The alkali-free glass fiber in the glass fiber tube has very strong tensile force, will not be broken, vulcanization resistance, smokeless, halogen-free, non-toxic, pure oxygen non-combustible, and good insulation characteristics. After the organic silica gel is cured, its safety and environmental protection are enhanced. Performance, effectively protect the health of workers and reduce the incidence of occupational diseases. Unlike other products, which are extremely harmful to the human body and the environment.

Corrosion resistance - Both the inside and outside of the fiberglass tube are corrosion resistant. This includes resistance to rust, pits, and dezincification, which weaken and damage metal pipes.

Low wrapping/scaling - Fiberglass is extremely resistant to inlay and scaling. The accumulation of these materials will reduce the internal diameter of the column tube, making the pump more difficult. The transparent, open fiberglass tube saves energy and extends the life of the pump. There is no need to cancel the zooming process.

No residues - Glass fiber will not release residues from metal. The residue damages the filter, making the fiberglass tube the choice of membrane filtration and RO water treatment plants.

Inert-The fiberglass tube is chemically non-reactive and will not corrode due to contact with salt water.

Heat resistance - Fiberglass casing has strong heat resistance to the heat of hydration during installation/grouting. Unlike PVC pipes, fiberglass sleeves will not wrinkle when exposed to high temperatures.


Application range of glass fiber tube:

Wire harness, hot runner, steel, smelting, shipbuilding and chemical industry and other high temperature areas, heating area cables, fluid pipelines, rolling mill cables, oil pipes, sawing edge cables, generator sets, electrical voltage equipment, oxygen sensors, large buildings , Hydraulic system, automobile wiring harness and exhaust pipe, etc.


Glass fiber tube parameters:

Characteristic items

Characteristic parameter

experiment method

Exterior

Smooth surface, uniform thickness covered with silicone resin coating, weaving patterns are clearly visible

Visually

Continuous use temperature (℃)

-10℃~+200℃

UL standard test

Temperature resistance

200±2℃ 24h≥1/2 original voltage value

UL standard test

Heat aging

200℃, 12 hours, no cracks

The test temperature is 200℃, 24 hours. Take it out and put it at room temperature for testing. The average damage is not less than half of the failure voltage before aging, and there is no crack on the surface.

Cold bending

Test temperature -10℃, no cracks in 1 hour

Test temperature -10℃, 1 hour, rewind the test tube on the casing of this specification and rewind 6 times, the casing surface coating has no cracks or peeling phenomenon

Horizontal combustion

≤30S

Burn with a flame of 1000±50Btu/ft, and put the horizontally placed casing in contact with the outer flame of the flame and burn for 15 seconds at a time, 2 times in a row, any one of the 2 tests spreads the flame cannot exceed 30 seconds and automatically extinguishes

Combustibility

Vw-1

UL1441 test

Volume resistivity (Ω.CM)

1014 Ωcm or more

UL1441 test

Hydrolytic stability

No sticky, no deformation, no softening

After putting the casing in the water for 24 hours, the surface of the casing will not be sticky, deformed, or soft

Remarks

For each of our products, we will design a dedicated test equipment, and each product is an empirical test, not a random test


Product quality certification:

Our company adheres to the concept of continuous innovation and advancement with the times, combined with the development of the 5G era, and the development and manufacturing of supporting smart equipment related products. A core R&D team with more than 20 years of experience has established a quality inspection room and an engineering research and development room. The related quality detectors ensure the quality of the products, so that our company has a number of invention patents, interprets the craftsmanship spirit with our own actions, and has successively passed ISO9001 certification, TS16949, UL, SGS, and other certifications. The company insists on product research and development to drive market sales and market sales to drive enterprise development. Adhering to the four-in-one business philosophy of "integrity, quality, efficiency, and innovation", we will continue to serve domestic and foreign customers with high-quality products, reasonable prices, perfect after-sales services, and the principle of mutual benefit.


Service Introduction:

Pre-sales: Pre-sales will actively communicate with customers detailed information, customer needs, product parameters, quality standards, provide consultation, accept telephone orders and mail orders, provide a variety of convenience and financial services, etc.

In-sale: In-sale provides customers with solutions with the best performance-to-price ratio, proactively track contract signing, delivery of goods, and help customers solve problems.

After-sales:

1. Dissatisfaction caused by the quality of the product itself. We will help the customer to solve the problem as soon as possible within the agreed period.

2. If the product cannot be used normally due to man-made reasons. We explain the cause of the problem to the customer, indicating that this type of problem is beyond our responsibility, and then provide other solutions to the customer based on the customer's problem.


FAQ:

Q: Are you a factory or a trading company?

Answer: We are a factory that can provide you with the best quality products and reasonable prices. We are also a UL, SGS, ROHS and TS16949 certified manufacturer, specializing in insulating pipes, OEM&ODM services.

Q: Can you provide free samples?

Answer: Yes, free samples are available, you only need to pay for shipping.

Q: What is your MOQ?

Answer: Usually, each color or size is 100 meters.

Q: What is your delivery time? Can you go short in 7 days or less?

Answer: 2---3 days for samples, 3---20 days for mass production after receipt of payment (depending on the quantity).

Q: How is your quality?

Answer: Try a small order, you will have judgment.


If you have any questions, please don't hesitate to let me know!


Hot Tags: Insulation sleeve, China,Fiberglass sleeve manufacturer, wholesale, buy, price, bulk, discount, quotation.

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
验证码,看不清楚?请点击刷新验证码